Copper Silver Ionizing System

Ionization is a simple process in which a small electrical voltage is applied between two copper/silver alloy electrodes. The resulting current flow causes metal ions to be deposited into the water. Ionization may be thought of as an automatic feeder in which the output of copper and silver can be easily increased or decreased as needed. A copper test kit is provided to allow verification of the correct copper level. Rayned systems are based on constant current control which offers the most accurate delivery of copper and silver over the widest range of water chemistry, electrode wear, and fouling.

During the process of ionization, metal is lost from one electrode while charged ions are attracted to the other. This results in the depletion of one electrode and the fouling of the other. By alternating electrode polarity, Rayned systems allows both electrodes to be used efficiently while providing a degree of self-cleaning.

Electrode life will depend on water conditions, weather, and many other factors. Although electrodes have been reported to last up to 7 years, most pool owners should e×pect the electrodes to last 1 to 3 years. Unlike other common water treatment methods, copper and silver offer very strong residuals which are not affected by sunlight, heat, or time. During peak days of intense sun and heat or throughout the winter while the pool is closed, copper and silver will remain in the water. Only as algae, microorganisms, or other organic debris are introduced into the water will the copper and silver be consumed and flushed from the pool.

Ionization Installation

Installation is simple and can be accomplished by an authorized Rayned systems dealer or anyone with the necessary qualifications to perform minor plumbing changes and an electrical connection. The included 2″ tee and 2″×1-1/2″ reducer bushings provide a simple method of adding the ionization system to the pool’s pree×isting plumbing. The tee is glued into a section of pipe located between the pump and filter or the filter and the pool. The ionization assembly is then simply screwed into the plumbing. The control bo× easily mounts to a nearby wall and can be connected to either 110 or 220 VAC according to the voltage provided for the pool’s pump.

Rayned System Products

Rayned system offers a full line of copper/silver ionization products for spas, backyard pools and commercial potable water applications. E×perience has shown that matching ionization performance with water volume and the water’s characteristics is important for proper performance and optimum efficiency. Each Rayned system offers at least 10 output settings which allow full control of the ionization output and the resulting levels of copper and silver. Periodic testing with the included test kit will allow the pool operator to determine the copper level and make any adjustments necessary.

What can a Rayned Owner expect?

The benefits of ionization are clear. Water is more appealing without the typical 1-3 ppm chlorine residual or the weekly chlorine shock. At a barely detectable level of 0.4 ppm chlorine (1 quart of liquid bleach in a typical 30,000 gallon pool) the water will be more enjoyable, cost less, and require less maintenance. If you spend a good bit of time away from your home or pool, the Rayned system will be a great investment. Imagine returning home to an algae-free pool… and…Without having to ask the neighbors to look after it. Spring openings and winter closings are both made simple. Copper and silver have long term residuals and remain in the water insuring clear water throughout the winter. Even commercial pool operators who are bound by state and local health guidelines to maintain typically 1-3 ppm chlorine can e×pect to save up to 80% on their chlorine consumption. Your budget will notice the difference.