WS1 CI
- Solid state microprocessor with easy access front panel settings.
- Three modes of operation; meter immediate, meter delayed, or time
clock delayed.
- Program in ppm, French degrees, German degrees, or cubic meters.
- Fully programmable regeneration cycle sequence (maximum 9).
- Programmable regeneration cycle times.
- Days override feature; 1 – 28 days available.
- Backwash and brining ability to 22″ diameter tanks
- Downflow/upflow regeneration.
- Backwash and brining ability to 22″ diameter tanks.
- Stores system configuration and operation data in nonvolatile memory.
- Coin Cell Lithium battery back-up with a 24 hour carry over.
- 12-volt output AC Adapter provides safe and easy installation.
- Control valve design provides optimum service and backwash rates.
- Treated water regenerant refill.
- Mixing valve option available.
- Low salt alarm.
- 24-hour clock.
- Reliable and proven DC drive.
Water Specialist 1” CI Control Specifications
| Inlet/Outlet Fittings |
¾” to 1.5” NPS |
| Cycles |
up to 9 |
| Valve Material |
Noryl (1)or equivalent |
| Regeneration |
down flow/up flow |
|
| Flow Rates |
| Service @ 15 psi/1 bar drop (includes bypass and meter)
|
102 lpm |
| Backwash @ 25 psi/1.7 bar drop (includes bypass) |
102 lpm |
|
| OPERATING PRESSURES |
| Minimum/Maximum |
20 – 125 psi (1.4 – 8.6 bar) |
|
| OPERATING TEMPERATURES |
| Minimum/Maximum |
40º – 110º F (4º – 43º C) |
|
| METER |
| Accuracy |
± 5% |
| Flow Rate Range |
1 – 102 lpm |
| Volume Range |
0.10 m – 2000.0 m |
| Totalizer |
1 m – 99,999 m |
|
| DIMENSIONS & WEIGHT |
| Distributor Pilot |
1.050″ OD Pipe (¾” NPS) |
| Drain Line |
¾” or 1″ NPT |
| Brine Line |
3/8″ or ½” OD Poly Tube |
| Mounting Base |
2 ½”- 8 NPSM |
| Height From Top Of Tank |
7/8″ (187 mm) |
| Weight |
4.5 lbs (2 kg) |
|
| ELECTRICAL SPECIFICATIONS |
|
US |
International |
| Supply Voltage |
120V AC |
230V AC |
| Supply Frequency |
60 Hz |
50 Hz |
| Output Voltage |
12V AC |
12V AC |
| Output Current |
500 mA |
500 mA |
|
| TANK APPLICATIONS |
| Water Softener |
6″ – 22″ Diameter |
| Water Filter (2) |
6″ – 22″ Diameter |
|
| CYCLES OF OPERATION |
| Choose up to nine regeneration cycles, in any order, with a wide range of available values: |
| Cycle |
Range of values |
| Backwash |
1 – 120 minutes |
| Rinse |
1 – 120 minutes |
| Pause (service) |
1 – 480 minutes |
| Brine (co-current) |
1 – 180 minutes |
| Brine (counter-current) |
1 – 180 minutes |
| Refill (softener) |
0.05 – 95.00 Kg |
| Refill (filter) |
0.05 – 95.00 Liters |
Options:
Backwash Filter, Bypass, Weather Cover |
Compatible with the following typical concentrations of regenerants or chemicals: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines |
1. Noryl is a trademark of General Electric |
2. Filter tank size calculated @ 10 gpm of backwash per square foot of bed area/407 lpm per square meter of bed area. |
